Brooks Straight Stairlift User Manual
Call or fill in our online form today for a hassle free quotation Brooks Lincoln (Acorn 120) Stairlift.. Place the hand-winding wheel into the hole and wind the carriage up the stairs (turn the wheel clockwise - do NOT turn anti-clockwise) maximum of ten turns until the digital display stops showing '3' and displays '1'.. If you have attempted the above and the code is still showing the micro switch which senses the position of the seat may be jammed or needing adjustment - [].. The Brooks Lincoln straight stair lift will give you Lockable swivel seat allows the user to safely enter and exit.
Place hand-winding wheel into the hole and wind the lift down the track (turn anti-clockwise).. Seat not in ride position Press the seat swivel lever and turn seat so it is in the ride position (as stated above).. Prise out the white disk on top of the carriage (a blunt knife or screwdriver may be required). HERE
Lift at bottom Locate the hand-winding wheel (gray mushroom shaped object approx.. Solution Check the seat is locked in the ride position (the back of the seat should be against the wall the lift runs up).. Note: Models with perch or standon option require the arm to be in the fully down position before operating.. Unicode controls for vb6 format Solution Lift at top Locate the hand-winding wheel (gray mushroom shaped object approx.. Take the hand-winding wheel out and run the lift down the track and back up to check the lift is ok. 5ebbf469cd HERE
5' in diameter, generally left under the rail on one of the stair treads) Prise out white disk on the carriage (a blunt knife or screwdriver may be required).. Take the hand-winding wheel out of the hole and send the lift to the top of the rail and run it back down again just to check everything is ok. Click
